Empalmadorapor por Fusión Mono Fibra FSM-80S

Protector de viento automático y completamente programable, calentador de tubo de 14 segundos, 200 empalmes / encogimientos, caja de tránsito multifunción con estación de trabajo integrada

General Details

La FSM-70S es el nuevo estándar de fusionadora con alineamiento por núcleo que cubre toda la variedad actual de necesidades del sector con una serie de características innovadoras, como tapas protectoras de aire automatizadas/Calefactor de protectores térmicos , 7 segundos tiempo de fusión y 14 segundos de contracción del protector, construcción robusta, maleta de transporte mejorada, etc. Todos ellos mejoran la eficiencia de los trabajos de empalme.

Características
  • El empalme mas rápido del mundo 7 s/protección 14 s.
  • Manejo manual mínimo. Empalme en 4 pasos.
  • Maleta de transporte multi-funcional con plataforma de trabajo.
  • Incluye videos de formación y soporte.
  • Robustez absoluta.
Especificaciones
Applicable fibresSM (ITU-T G.652 & G.657), MM (ITU-T G.651),DS (ITU-T G.653), NZDS (ITU-T G.655),Others
Fibre CountSingle
Cladding diameter80 to 150μm
Coating diameter100 to 1000μm
Fibre cleaved length5 to 16mm using Sheath Clamp A, B or 5 to13mm using FH-60-250, FH-60-900
Actual average splice loss0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS
Splice time7sec:SM FAST mode, 12sec :SM AUTO mode, 15sec:AUTO mode
Return loss60dB or greater
Splicing modes100 splicer modes are available
Splice loss estimateSeveral types of core deformations as well as core axis offset are taken into account for accurate loss estimate
Attenuation splice functionIntentional high splice loss of 0.1dB to 15dB (0.01dB step) can be made for an inline fixed attenuator
Storage of splice resultThe last 2000 results to be stored in the internal memory
MagnificationX / Y (300X magnification), or both X and Y simultaneously (160X magnification)
Viewing methodBy two CMOS cameras for intersecting fiber viewing and 4.73 inches TFT colour LCD monitor
Tension test1.96 to 2.25N
Operating condition0-5000m above sea level, 0-95% RH and -10 to 50°C respectively
Tube heaterBuilt-in auto-start tube heater with 10 heating modes and up to 20 for reference
Tube heat time13-15sec. with FP-03 protection sleeve. Total memory of 30 heating modes are available
Applicable protection sleeve length60mm, 40mm and a series of micro sleeves
No. of splice/heating with battery200 times of splicing and heat shrinking under with BTR-09
Power supplyAuto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-18. 14.8Vd.c. with BTR-09
TerminalsUSB2.0 ( Mini-B) for data and video signal transfer to PC
Wind protectionUp to 15m/s wind velocity
Dimensions146(W) x 159(D) x 150(H) mm
Including wind protector, monitor, and rubber protector
Excluding rubber foot
Weight2.5 kg, with ADC-18 AC adaptor
2.7 kg, with BTR-09 battery
Electrode life3000 arc-discharges

Standard Package

ItemDescriptionModel No.Qty
1Fusion SplicerFSM-80S with CLAMP-S70A1 pc
2AC adaptor/battery chargerADC-181 pc
3AC power cordACC-XX1 pc
4Spare ElectrodesELCT2-20A1 pair
5CleaverCT-30A1 pc
6Battery PackBTR-091 pc
7USB cableUSB-011 pc
8Quick reference guideM-80S/19S-E1 pc
9Warning and cautionsW-70-E1 pc
10Instruction ManualM-701 pc
11Alcohol PotAP-011 pc
12Battery charge cordDCC-181 pc
13Carrying CaseCC-301 pc
14Screw DriverSD-011 pc
Aplicaciones
  • Instalación de red de fibra óptica
  • Instalaciones de conectores
  • Fabricación de dispositivos optoelectrónicos
Comments

Leave a Reply