Blog

January 4, 2018

Comparison of Fujikura Fusion Splicer FSM-70S and FSM-70S+, FSM-80S and FSM-80S+

The 70S+ is the new standard core alignment fusion splicer covering varied splicing needs in those fields with a series of innovative features, such as automated wind protector / tube heaters, 6 seconds splicing and 9 seconds tube heating, ruggedized body, improved carrying case, wireless communication functions, etc. They are all for great splicing efficiency.

Comparison Table

Part No. FSM-80S FSM-70S FSM-80S+ FSM-70S+
Applicable fibres SM (ITU-T G.652 / G.657), MM (ITU-T G.651),DS (ITU-T G.653), NZDS (ITU-T G.655) SM (ITU-T G.652 / G.657), MM (ITU-T G.651),DS (ITU-T G.653), NZDS (ITU-T G.655)
Fibre Count Single Single
Cladding diameter 80 to 150um Cladding Diameter: 80um to150um
Coating diameter 100 to 3000um 100 to 3000um
Actual average splice loss 0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS 0.02dB (SM), 0.01dB (MM), 0.04dB (DSF) and 0.04dB (NZDS) Measured by cut-back method relevant to ITU-T and IEC standards.
Splice time 7sec:SM FAST mode,

12sec :SM AUTO mode,

15sec:AUTO mode

6sec ULTRA FAST

7sec SM FAST,

10sec SM AUTO

Return loss 60dB or greater 60dB
Splicing modes Total 100 splice modes / 30 heating modes Total 100 splice modes / 30 heating modes
Attenuation splice function Intentional high splice loss of 0.1dB to 15dB (0.01dB step) can be made for an inline fixed attenuator Intentional high splice loss of 0.1dB to 15dB(0.1dB step)can be made for an in-line fixed attenuator.
Magnification X / Y (300X magnification), or both X and Y simultaneously (160X magnification) X / Y (320X magnification), or both X and Y simultaneously (200X magnification)
Viewing method By two CMOS cameras for intersecting fiber viewing and 4.73 inches TFT colour LCD monitor 2 axis CMOS camera with 4.73” color LCD.
Tension test 1.96 to 2.25N 1.96 to 2.25N
Operating condition 0-5000m above sea level, 0-95% RH and -10 to 50degC respectively Altitude : 0 to 5,000m above sea level, Wind : 15m/sec Temperature : -10 to 50deg C, Humidity : 0 to 95%RH, non-dew
Tube heat time 13sec FP-03,coating dia.250μm 14sec FP-03,coating dia.900μm 9sec Slim 60mm ,coating dia.250μm 13sec FP-03,coating dia.250μm 14sec FP-03,coating dia.900μm 9sec Slim 60mm ,coating dia.250μm
Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves 60mm, 40mm and a series of micro sleeves
No. of splice/heating with battery 200 times of splicing and heat shrinking under with BTR-09 Typical 200 cycles with BTR-09
Resistance features Shock : 76cm (30inch) all surface drop
Dust : Exposure to dust (0.1 to 500μm dia Alumina Silicate), IP5X Rain : H=10mm/hr for 10min, IPX2
Shock : 76cm (30inch) all surface drop
Dust : Exposure to dust (0.1 to 500μm dia Alumina Silicate), IP5X Rain : H=10mm/hr for 10min, IPX2
Wireless connectivity / Wireless technical standard : Bluetooth®4.1*3
OS : Andoroid 5.0 or above, ios 8.0 or above (iphone6 above)
Terminals USB 2.0 (Mini-B type) connector for PC communication. 6-pin Mini-DIN connector for HJS-02 or HJS-03 power supply. USB 2.0 (Mini-B type) connector for PC communication. 6-pin Mini-DIN connector for RS02 or RS03 power supply
Other features PC software upgrade / data management PC software upgrade / data management
Dimensions 146(W) x 159(D) x 150(H) mm 146(W) x 159(D) x 150(H) mm
, , ,
About TARLUZ.COM