Fujikura 70R Fusion Splicer

Fast-Mode: Finishing splicing in 11 seconds , finishing heating in 18 seconds. for both single core and ribbon fiber

General Details

The Fujikura 70R is equipped with a precision, fixed v-groove for splicing single fibers or ribbon fiber up to 12 fibers. Incorporating the proven ruggedized features pioneered by Fujikura, the 70R has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. A new auto-start “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 40-second shrink time for 12-fiber ribbon. The result is a total splice process time of approximately 55 seconds! Ruggedness and durability are greatly enhanced by a mirror-less optical system and “severe-impact resistant” monitor. Battery capacity is now 110 splices/shrinks. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before.

  • Automated and programmable wind protector
  • 40-second automated tube heater
  • Fully ruggedized for shock, dust and moisture
  • Li-ion battery with 110 splices/shrinks per charge
  • On-board training and support videos
  • Internet software upgrades
  • Multi-function transit case with integrated workstation
ModelFSM-70R Fusion SplicerFSM-60R Fusion Splicer
Applicable FibersSMF(ITU-TG.652),MMF(ITU-TG.651).DSF(ITU-TG.653),NZDSF(ITU-TG.655),BIF(ITU-T657)
Fiber CountSingle, 2, 4, 5, 6, 8, 10, 12
Cladding Diameter125 μm
Coating DiameterRibbon: 0.25 mm to 0.4 mm, Single: 250 μm and 900 μm
Fiber Cleave Length10 mm ~13mm10mm
Typical Average Splice Loss0.05 dB with SM, 0.02 dB with MM, 0.08 dB with DS, 0.08 dB with NZDS; measured by cut-back method relevant to ITU-T standards
Splicing TimeTypical 11 seconds with standard single-mode fiberTypical 20 seconds with standard single-mode fiber
Arc Calibration MethodAutomatic, real-time by using results of previous splice when in AUTO mode; manual arc calibration function available
Splicing Modes100 preset and user programmable modes
Splice Loss EstimateBased upon dual camera cladding alignment data
Storage of Splice ResultLast 2000 splice results stored in the internal memory
Fiber DisplayX or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation
Magnification35X to 90X
Viewing MethodDual cameras with 4.7 inch TFT color LCD monitor with anti-reflective coating
Operating Condition0 to 3,660 m above sea level, 0 to 95% RH, and -10 to 50°C respectively
Mechanical Proof Test1.96 to 2.25 N
Tube HeaterBuilt-in tube heater with 30 heating modes; auto-start function
Tube Heating TimeTypical 40 seconds with FP-5 sleeve, 17 seconds with FP3 (40), 5-15 seconds with Fujikura micro sleeves
Protection Sleeve Length60 mm, 40 mm, Micro
Splice/Heat Cycles with BatteryTypical 110 cycles with power save functions activatedTypical 90 cycles with power save functions activated
Electrode Life1,500 Arc Discharges
Power SupplyAuto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-18, 14.8V DC with BTR-09 batteryAuto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-13, 13.2V DC with BTR-08 battery
TerminalsUSB 2.0 (USB-B type) for PC communication and Mini-DIN (6-pin) for HJS-02/03USB 1.1(USB-B type) for PC communication and Mini-DIN (6-pin) for HJS-02/03 and SH-8 tuber heater
Wind ProtectionMaximum wind velocity of 15m/s (34 mph)
Dimensions146 W x 159 D x 150 H (mm) / 5.7 W x 6.3 D x 5.9 H (inches)136 W x 161 D x 143 H (mm) / 5.3 W x 6.3 D x 5.6 H (inches)
Weight2.3 kg (5.1 lbs) with AC adapter; 2.5 kg (5.5 lbs) with battery2.1 kg (4.6 lbs) with AC adapter-13; 2.5 kg (5.5 lbs) with battery
  • Fiber optic network installation
  • FUSEConnect® connector installations
  • Optoelectronic device manufacturing

Leave a Reply