{"id":11025,"date":"2018-08-30T15:06:02","date_gmt":"2018-08-30T15:06:02","guid":{"rendered":"https:\/\/www.tarluz.com\/?p=11025"},"modified":"2018-08-30T15:06:35","modified_gmt":"2018-08-30T15:06:35","slug":"best-practices-for-managing-the-cabling-during-cable-instllation","status":"publish","type":"post","link":"https:\/\/www.tarluz.com\/fr\/data-center\/best-practices-for-managing-the-cabling-during-cable-instllation\/","title":{"rendered":"Best Practices for Managing the Cabling During Cable Instllation"},"content":{"rendered":"<ul>\n<li>Do not placing the multiple bundles or over-bunding the cables, it might increase the loss of the cable, or damage the jacekt.<\/li>\n<li>Avoid over bending the fiber cable, it is not copper cable, and considering to use bending insensitive cable to avoide bending loss<\/li>\n<li>Avoid mounting cabling components in locations that block access to other equipment (power strip or fans) inside and outside the racks.<\/li>\n<li>Make sure not run the fiber and cable in the same raceway, copper cable is heavy and might damage the fiber cable<\/li>\n<li>Keey about 10% for spare, do not use the maximu lengths it can reaches<\/li>\n<li>Install higher cable types (OM3, OM4 or OM5 only), It will meet current and future application requirements, easy for future system upgrade<\/li>\n<li>Cabling installations and components should be compliant with industry standards.<\/li>\n<li>Don\u2019t stress the cable by doing any of the following.\n<ul>\n<li>Applying additional twists<\/li>\n<li>Pulling or stretching beyond its specified pulling load rating<\/li>\n<li>Bending it beyond its specified bend radius, and certainly not beyond 90o<\/li>\n<li>Creating tension in suspended runs<\/li>\n<li>Stapling or applying pressure with cable ties<\/li>\n<\/ul>\n<\/li>\n<li>Avoid routing cables through pipes and holes. This may limit additional future cable runs.<\/li>\n<li>Label cables with their destination at every termination point (this means labeling both ends of the cable).<\/li>\n<li>Test every cable as it is installed and terminated. It will be difficult to identify problem cables later.<\/li>\n<li>Locate the main cabling distribution area nearer the center of the data center to minimize cable distances.<\/li>\n<li>Do not route cables such that they block equipment cooling fans and restrict airflow.<\/li>\n<li>Use thin and high-density cables wherever possible, allowing more cable runs in tight spaces. Ensure the selected cables meet standard specifications.<\/li>\n<li>Dedicate outlets for terminating horizontal cables, that is, allocate a port in the patch panel for each horizontal run.<\/li>\n<li>Include sufficient vertical and horizontal managers in your design; future changes may involve downtime as cables are removed during the changes.<\/li>\n<li>Utilize modular cabling systems to map ports from equipment with high density port counts; as described in the earlier section titled \u201cCable Management Setup and Configuration\u201d.<\/li>\n<\/ul>\n","protected":false},"excerpt":{"rendered":"<p>Do not placing the multiple bundles or over-bunding the cables, it might increase the loss of the cable, or damage the jacekt. Avoid over bending the fiber cable, it is not copper cable, and considering to use bending insensitive cable to avoide bending loss Avoid mounting cabling components in locations that block access to other [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[399],"tags":[],"class_list":["post-11025","post","type-post","status-publish","format-standard","hentry","category-data-center"],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v23.3 (Yoast SEO v27.4) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>Best Practices for Managing the Cabling During Cable Instllation - TARLUZ - FIBER OPTIC SUPPLIERS<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.tarluz.com\/fr\/data-center\/best-practices-for-managing-the-cabling-during-cable-instllation\/\" \/>\n<meta property=\"og:locale\" content=\"fr_FR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Best Practices for Managing the Cabling During Cable Instllation\" \/>\n<meta property=\"og:description\" content=\"Do not placing the multiple bundles or over-bunding the cables, it might increase the loss of the cable, or damage the jacekt. Avoid over bending the fiber cable, it is not copper cable, and considering to use bending insensitive cable to avoide bending loss Avoid mounting cabling components in locations that block access to other [&hellip;]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.tarluz.com\/fr\/data-center\/best-practices-for-managing-the-cabling-during-cable-instllation\/\" \/>\n<meta property=\"og:site_name\" content=\"TARLUZ - FIBER OPTIC SUPPLIERS\" \/>\n<meta property=\"article:published_time\" content=\"2018-08-30T15:06:02+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2018-08-30T15:06:35+00:00\" \/>\n<meta name=\"author\" content=\"TARLUZ.COM\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"\u00c9crit par\" \/>\n\t<meta name=\"twitter:data1\" content=\"TARLUZ.COM\" \/>\n\t<meta name=\"twitter:label2\" content=\"Dur\u00e9e de lecture estim\u00e9e\" \/>\n\t<meta name=\"twitter:data2\" content=\"2 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.tarluz.com\\\/fr\\\/data-center\\\/best-practices-for-managing-the-cabling-during-cable-instllation\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.tarluz.com\\\/fr\\\/data-center\\\/best-practices-for-managing-the-cabling-during-cable-instllation\\\/\"},\"author\":{\"name\":\"TARLUZ.COM\",\"@id\":\"https:\\\/\\\/www.tarluz.com\\\/fr\\\/#\\\/schema\\\/person\\\/5740f1b7210de5d651317604459f2fb1\"},\"headline\":\"Best Practices for Managing the Cabling During Cable Instllation\",\"datePublished\":\"2018-08-30T15:06:02+00:00\",\"dateModified\":\"2018-08-30T15:06:35+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.tarluz.com\\\/fr\\\/data-center\\\/best-practices-for-managing-the-cabling-during-cable-instllation\\\/\"},\"wordCount\":355,\"articleSection\":[\"Data Center\"],\"inLanguage\":\"fr-FR\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.tarluz.com\\\/fr\\\/data-center\\\/best-practices-for-managing-the-cabling-during-cable-instllation\\\/\",\"url\":\"https:\\\/\\\/www.tarluz.com\\\/fr\\\/data-center\\\/best-practices-for-managing-the-cabling-during-cable-instllation\\\/\",\"name\":\"Best Practices for Managing the Cabling During Cable Instllation - TARLUZ - FIBER OPTIC SUPPLIERS\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.tarluz.com\\\/fr\\\/#website\"},\"datePublished\":\"2018-08-30T15:06:02+00:00\",\"dateModified\":\"2018-08-30T15:06:35+00:00\",\"author\":{\"@id\":\"https:\\\/\\\/www.tarluz.com\\\/fr\\\/#\\\/schema\\\/person\\\/5740f1b7210de5d651317604459f2fb1\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.tarluz.com\\\/fr\\\/data-center\\\/best-practices-for-managing-the-cabling-during-cable-instllation\\\/#breadcrumb\"},\"inLanguage\":\"fr-FR\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.tarluz.com\\\/fr\\\/data-center\\\/best-practices-for-managing-the-cabling-during-cable-instllation\\\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.tarluz.com\\\/fr\\\/data-center\\\/best-practices-for-managing-the-cabling-during-cable-instllation\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.tarluz.com\\\/fr\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Best Practices for Managing the Cabling During Cable Instllation\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.tarluz.com\\\/fr\\\/#website\",\"url\":\"https:\\\/\\\/www.tarluz.com\\\/fr\\\/\",\"name\":\"TARLUZ - FIBER OPTIC SUPPLIERS\",\"description\":\"DEDICATED IN FIBER OPTIC INDUSTRY\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.tarluz.com\\\/fr\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"fr-FR\"},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.tarluz.com\\\/fr\\\/#\\\/schema\\\/person\\\/5740f1b7210de5d651317604459f2fb1\",\"name\":\"TARLUZ.COM\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/6e1d411095ca6ac0a50a32b0e09d4e99f1d22d747cb3e84f95fe301bdc28d113?s=96&d=blank&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/6e1d411095ca6ac0a50a32b0e09d4e99f1d22d747cb3e84f95fe301bdc28d113?s=96&d=blank&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/6e1d411095ca6ac0a50a32b0e09d4e99f1d22d747cb3e84f95fe301bdc28d113?s=96&d=blank&r=g\",\"caption\":\"TARLUZ.COM\"},\"url\":\"https:\\\/\\\/www.tarluz.com\\\/fr\\\/author\\\/admin\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Best Practices for Managing the Cabling During Cable Instllation - TARLUZ - FIBER OPTIC SUPPLIERS","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.tarluz.com\/fr\/data-center\/best-practices-for-managing-the-cabling-during-cable-instllation\/","og_locale":"fr_FR","og_type":"article","og_title":"Best Practices for Managing the Cabling During Cable Instllation","og_description":"Do not placing the multiple bundles or over-bunding the cables, it might increase the loss of the cable, or damage the jacekt. Avoid over bending the fiber cable, it is not copper cable, and considering to use bending insensitive cable to avoide bending loss Avoid mounting cabling components in locations that block access to other [&hellip;]","og_url":"https:\/\/www.tarluz.com\/fr\/data-center\/best-practices-for-managing-the-cabling-during-cable-instllation\/","og_site_name":"TARLUZ - FIBER OPTIC SUPPLIERS","article_published_time":"2018-08-30T15:06:02+00:00","article_modified_time":"2018-08-30T15:06:35+00:00","author":"TARLUZ.COM","twitter_card":"summary_large_image","twitter_misc":{"\u00c9crit par":"TARLUZ.COM","Dur\u00e9e de lecture estim\u00e9e":"2 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.tarluz.com\/fr\/data-center\/best-practices-for-managing-the-cabling-during-cable-instllation\/#article","isPartOf":{"@id":"https:\/\/www.tarluz.com\/fr\/data-center\/best-practices-for-managing-the-cabling-during-cable-instllation\/"},"author":{"name":"TARLUZ.COM","@id":"https:\/\/www.tarluz.com\/fr\/#\/schema\/person\/5740f1b7210de5d651317604459f2fb1"},"headline":"Best Practices for Managing the Cabling During Cable Instllation","datePublished":"2018-08-30T15:06:02+00:00","dateModified":"2018-08-30T15:06:35+00:00","mainEntityOfPage":{"@id":"https:\/\/www.tarluz.com\/fr\/data-center\/best-practices-for-managing-the-cabling-during-cable-instllation\/"},"wordCount":355,"articleSection":["Data Center"],"inLanguage":"fr-FR"},{"@type":"WebPage","@id":"https:\/\/www.tarluz.com\/fr\/data-center\/best-practices-for-managing-the-cabling-during-cable-instllation\/","url":"https:\/\/www.tarluz.com\/fr\/data-center\/best-practices-for-managing-the-cabling-during-cable-instllation\/","name":"Best Practices for Managing the Cabling During Cable Instllation - TARLUZ - FIBER OPTIC SUPPLIERS","isPartOf":{"@id":"https:\/\/www.tarluz.com\/fr\/#website"},"datePublished":"2018-08-30T15:06:02+00:00","dateModified":"2018-08-30T15:06:35+00:00","author":{"@id":"https:\/\/www.tarluz.com\/fr\/#\/schema\/person\/5740f1b7210de5d651317604459f2fb1"},"breadcrumb":{"@id":"https:\/\/www.tarluz.com\/fr\/data-center\/best-practices-for-managing-the-cabling-during-cable-instllation\/#breadcrumb"},"inLanguage":"fr-FR","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.tarluz.com\/fr\/data-center\/best-practices-for-managing-the-cabling-during-cable-instllation\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.tarluz.com\/fr\/data-center\/best-practices-for-managing-the-cabling-during-cable-instllation\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.tarluz.com\/fr\/"},{"@type":"ListItem","position":2,"name":"Best Practices for Managing the Cabling During Cable Instllation"}]},{"@type":"WebSite","@id":"https:\/\/www.tarluz.com\/fr\/#website","url":"https:\/\/www.tarluz.com\/fr\/","name":"TARLUZ - FIBER OPTIC SUPPLIERS","description":"DEDICATED IN FIBER OPTIC INDUSTRY","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.tarluz.com\/fr\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"fr-FR"},{"@type":"Person","@id":"https:\/\/www.tarluz.com\/fr\/#\/schema\/person\/5740f1b7210de5d651317604459f2fb1","name":"TARLUZ.COM","image":{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/secure.gravatar.com\/avatar\/6e1d411095ca6ac0a50a32b0e09d4e99f1d22d747cb3e84f95fe301bdc28d113?s=96&d=blank&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/6e1d411095ca6ac0a50a32b0e09d4e99f1d22d747cb3e84f95fe301bdc28d113?s=96&d=blank&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/6e1d411095ca6ac0a50a32b0e09d4e99f1d22d747cb3e84f95fe301bdc28d113?s=96&d=blank&r=g","caption":"TARLUZ.COM"},"url":"https:\/\/www.tarluz.com\/fr\/author\/admin\/"}]}},"_links":{"self":[{"href":"https:\/\/www.tarluz.com\/fr\/wp-json\/wp\/v2\/posts\/11025","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.tarluz.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.tarluz.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.tarluz.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.tarluz.com\/fr\/wp-json\/wp\/v2\/comments?post=11025"}],"version-history":[{"count":3,"href":"https:\/\/www.tarluz.com\/fr\/wp-json\/wp\/v2\/posts\/11025\/revisions"}],"predecessor-version":[{"id":14116,"href":"https:\/\/www.tarluz.com\/fr\/wp-json\/wp\/v2\/posts\/11025\/revisions\/14116"}],"wp:attachment":[{"href":"https:\/\/www.tarluz.com\/fr\/wp-json\/wp\/v2\/media?parent=11025"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.tarluz.com\/fr\/wp-json\/wp\/v2\/categories?post=11025"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.tarluz.com\/fr\/wp-json\/wp\/v2\/tags?post=11025"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}