Blog

Passive Network TAP for 40G/100G Data Center

OTAP splitters (MTP/MPO interface) are hardware tools that allow you to monitor your network. The Optical TAP with 50:50, 60:40 or with a customized splitting ratio, which could 100% copy your network data to the monitoring site. The Fiber TAPs are passive (non-powered), that will not cause the live network devices to lose the link between one another if power failure.

The recent product additions include:

40G-SR4 and 100G-SR10 Multimdode MPO or MTP® Passive Fiber Network TAPs.

  • MPO or MTP® connectors for lowest dB loss per connector.
  • New Prism based technology that reduces bit errors on OM3 + OM4 applications, providing 100% utilization.
  • Available in 40G-SR4 or 100G-SR10 Multimode.

40G and 100G Single Mode Passive Fiber Network TAPs.

  • No upgrade needed. This handles today and tomorrow’s network traffic.
  • Supports long range and extended range single mode fiber link.
  • Scalable design with 1U rack mount kit that holds customized TAPs based on customer need.

 

Centre de Données
WhatsApp TARLUZ