Soudeuse par fusion de fibres en ruban Fujikura FSM-70R
Soudure en 7 secondes, et rétreint en 14 secondes
General Details
La FSM-70R est la nouvelle soudeuse par fusion de fibres en ruban standard (jusqu’à 12 fibres en ruban) couvrant des besoins en soudure variés dans ses domaines avec une série de fonctionnalités innovantes telles que le pare-vent / four automatisés, soudure en 11 secondes et rétreint en 18 secondes, corps renforcé, valise de transport améliorée, etc… Cela permet une plus grande efficacité de la soudure.
Caractéristiques
- Pare-vent / Four de rétreint automatisés pour opération rapide
- Valise de transport de conception innovante
- Résistance aux chocs et à la poussière
- Grand écran LCD couleur
- Batterie Li-Ion puissante
- Menu dédié avec manuel d’utilisation pré-installé / assistance de l’utilisateur
Spécifications
| Parameters | Specifications | |
| Model | FSM-70R Fusion Splicer | FSM-60R Fusion Splicer |
| Applicable Fibers | SMF(ITU-TG.652),MMF(ITU-TG.651).DSF(ITU-TG.653),NZDSF(ITU-TG.655),BIF(ITU-T657) | |
| Fiber Count | Single, 2, 4, 5, 6, 8, 10, 12 | |
| Cladding Diameter | 125 μm | |
| Coating Diameter | Ribbon: 0.25 mm to 0.4 mm, Single: 250 μm and 900 μm | |
| Fiber Cleave Length | 10 mm ~13mm | 10mm |
| Typical Average Splice Loss | 0.05 dB with SM, 0.02 dB with MM, 0.08 dB with DS, 0.08 dB with NZDS; measured by cut-back method relevant to ITU-T standards | |
| Splicing Time | Typical 11 seconds with standard single-mode fiber | Typical 20 seconds with standard single-mode fiber |
| Arc Calibration Method | Automatic, real-time by using results of previous splice when in AUTO mode; manual arc calibration function available | |
| Splicing Modes | 100 preset and user programmable modes | |
| Splice Loss Estimate | Based upon dual camera cladding alignment data | |
| Storage of Splice Result | Last 2000 splice results stored in the internal memory | |
| Fiber Display | X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation | |
| Magnification | 35X to 90X | |
| Viewing Method | Dual cameras with 4.7 inch TFT color LCD monitor with anti-reflective coating | |
| Operating Condition | 0 to 3,660 m above sea level, 0 to 95% RH, and -10 to 50°C respectively | |
| Mechanical Proof Test | 1.96 to 2.25 N | |
| Tube Heater | Built-in tube heater with 30 heating modes; auto-start function | |
| Tube Heating Time | Typical 40 seconds with FP-5 sleeve, 17 seconds with FP3 (40), 5-15 seconds with Fujikura micro sleeves | |
| Protection Sleeve Length | 60 mm, 40 mm, Micro | |
| Splice/Heat Cycles with Battery | Typical 110 cycles with power save functions activated | Typical 90 cycles with power save functions activated |
| Electrode Life | 1,500 Arc Discharges | |
| Power Supply | Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-18, 14.8V DC with BTR-09 battery | Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-13, 13.2V DC with BTR-08 battery |
| Terminals | USB 2.0 (USB-B type) for PC communication and Mini-DIN (6-pin) for HJS-02/03 | USB 1.1(USB-B type) for PC communication and Mini-DIN (6-pin) for HJS-02/03 and SH-8 tuber heater |
| Wind Protection | Maximum wind velocity of 15m/s (34 mph) | |
| Dimensions | 146 W x 159 D x 150 H (mm) / 5.7 W x 6.3 D x 5.9 H (inches) | 136 W x 161 D x 143 H (mm) / 5.3 W x 6.3 D x 5.6 H (inches) |
| Weight | 2.3 kg (5.1 lbs) with AC adapter; 2.5 kg (5.5 lbs) with battery | 2.1 kg (4.6 lbs) with AC adapter-13; 2.5 kg (5.5 lbs) with battery |
Applications
- Installation réseau en fibre optique
- Installations du connecteur FUSEConnect®
- Fabrication d’appareils optoélectroniques