TARLUZ 2.5mm Fiber Optic Clean Sticks with foam tipped is an ideal fiber optic cleaning tool for cleaning bulkheads after installation. It is often used to remove contaminations on the connector end-faces and inside bulkhead adapters.
- 2.5mm Fiber Optic Foam Swabs is an economical solution for cleaning end faces and equipment test ports
- Each 2.7″ long foam swab no adhesives, binders or fibers to leave residues
- STEP ONE: Take one piece of Fiber optic stick
- STEP TWO: Insert the fiber optic stick tip into the adapter or connector
- STEP THREE: Push or rotate the sticks to start the cleaning
- STEP FOUR: Check the end face of the ferrule, if it cleaned, discard the fiber optic stick, if not repeat step one to step three.