FO 103-D-250 “Dual-Hole” Fiber Optic Strippers

FO 103-D-250 “Dual-Hole” Fiber Optic Strippers

  • Dual hole models offer the same quality as our standard FO 103-S fiber tool coupled with a second hole
  • FO 103-D-250: Second hole for stripping 900um tight buffer down to 250um buffer coating and standard 125um fiber stripping (250um removal to 125um) – allows longer stripping lengths without damaging the fiber
  • Easy-to-read stripping diagrams imprinted on handles
  • Length: 5.375 in. (137 mm)
  • Weight: 2.5 oz (71 g)

Contact Customer Service for any applications If this tools is not meet your requirement.

Note: When stripping extended lengths of buffer coating, it is recommended that several short strips be made to achieve the desired length. This will relieve any pressure caused by the stripped buffer coating as it accumulates ahead of the cutting edge. Clean the “V” opening of the tool on a regular basis with 99% Isopropyl Alcohol or an “Alcohol Prep Wipe” to insure proper operation. Failure to do so could cause the fiber to break.

Caution: The tool should not be opened beyond factory pre set limits. Forcing open the tool or bypassing the open position stop will result in loss of factory pre-set calibration and damage the tool.

Leave a Reply