FOSC-LV01 7 ports Fiber Optic Splice Closures

Dome / Cap / Vertical / Butt type, 7 doors (6 round doors, 1 oval door), maximum support of 288 fibers.

General Details

In the fiber-optic network, cables are usually limited to 2km or 3km per coil, so it requires a device to extend the fiber cable in the long-distance cable network, CATV HFC network, FTTH PON network, etc. closures with multiple ports for cable entry and with doors for extension, distribution, branching of cables, etc. within the housing body, there is room with the fiber optic splice tray installed to secure, protect and manage the fiber cable after the cable has been spliced. There are types in line, sometimes we say fiber optic splice closures of the horizontal type and dome type or vertical type, end type. However, recently locks are with more function than cable and joint protection, but division, so the type of optical fiber division is very popular now, all these fasteners are made of high strength plastic with excellent waterproof, dustproof, features. Tarluz has offered several FOSC, do not hesitate to contact for more information about the product.

Features
  • Applied for bunchy fiber
  • Dome type / cover type / end type
  • Splicing trays are layered and easy to be disassembled, convenient installation.
  • Easy to install and re-enter with a standard wrench.
Specifications
Part No. FOSC-LV01
Sealing Type Heat shrinking sealing
Max. Fiber Capacity Bunch: 24 ~ 288 cores
Capacity of splice tray 24-core
Max. splice trays number 12
Cable ports 7 Entries (1 oval port, 6 round ports)
Cable diameter (mm) Ф5 ~ Ф38
Application Aerial, Duct, Direct Bury
Sealing structure Sticky structure
Protection level IP68
Dimension (mm) 515x Ф310
Weight (kg) 3.0 ~ 4.6

 

Standard Accessories

No. Accessory Name Quantity Applications
1 Heat shrinkable protective sleeve per capacity Protecting fiber splices
2 Nylon tie Fixing fiber with protective coat
3 Insulation tape 1 roll Enlarging diameter of fiber cable for easy fixing
4 Seal tape 1 roll Enlarging diameter of fiber cable which fits in with seal fitting
5 Hanging hook 1 set For aerial use
6 Earthing wire 1 piece Putting through between earthing devices
7 Abrasive cloth 1 piece Scratching fiber cable
8 Labeling paper 1 piece Labeling fiber
9 Special wrench 1 piece Fixing bolts, tightening nut of reinforced core
10 Measuring paper 1 piece To measure perimeter of fiber cable, of which the diameter is enlarged with seal tape
11 Buffer tube Hitched to fibers and fixed with FOST, managing buffer
12 Desiccant 1 bag Put into FOSC before sealing for desiccating air.
Applications
  • Application of aerial assembly, duct, direct burial and wall
  • FTTH network PON, CATV network, other fiber optic network
WhatsApp TARLUZ